Installation and Assembly - Adapter Bracket for VESA®
800 x 400 Screens
Model: PLP-V8X4
IMPORTANT! Read instruction sheet before you start installation and assembly.
Before you start make sure all parts listed are included with your product.
Parts List
Description
BB
AA
Qty.
Part #
AA adapter bracket
1
4
4
4
4
4
1
201-1433
510-1050
510-1064
520-1068
540-9400
540-9440
560-9646
BB M6 x 12 mm serrated washer head socket pin screw
CC M5 x 12 mm serrated washer head socket pin screw
DD M8 x 15 mm socket pin screw
EE #10 SAE flat washer
GG
FF 1/4" SAE flat washer
GG 4 mm security allen wrench
FF
CC
EE
DD
Some parts may appear slightly different than illustrated.
WARNING
• Do not overtighten. Overtightening may cause permanent damage to the screen. Torque to 26-35 in • lb (30-40 kg • cm).
Begin with four M5 x 12 mm serrated washer
1
head socket pin screws (CC), hand thread
through #10 SAE flat washer (EE) and adapter
plate (AA) into screen as shown below. Do not
over tighten. If screw is too small, select four
M6 x 12 mm serrated washer head socket pin
screws (BB) and 1/4" SAE flat washers or four
M8 x 15 mm socket pin screws (DD). Tighten
screws.
NOTE: Screw must make at least three full
turns into the mounting hole and fit snug into
place. If you have any questions, please call
Peerlesscustomercareat1-800-865-2112.
AA
BB, CC
or DD
FF or EE
NOTE: Spacers may not be used,
depending upon the size of screw.
ISSUED: 11-09-07 SHEET #: 202-9250-2 11-04-08
1 of 1
For customer care call 1-800-729-0307 or 708-865-8870.
© 2008 Peerless Industries, Inc. Allrightsreserved.
Allotherbrandandproductnamesaretrademarksorregisteredtrademarksoftheirrespectiveowners.
Muat Turun from Www.Somanuals.com. All Manuals Search And Muat Turun.
|