O W N E R ’ S M A N U A L
T RU 346 5
Muat Turun from Www.Somanuals.com. All Manuals Search And Muat Turun.
Contents
Telephone Features
3-way conferencing
Intercom Feature
Introduction / Features
Controls and Functions
2
4
29
30
31
Getting Started
Read this first
Call Transfer Feature
6
7
8
10
12
13
Caller ID Features
Caller ID
Step 1: Checking the package contents
Step 2: Setting up the base unit
Step 3: Installing the handset battery pack
Step 4: Setting Caller ID options
Entering your Area Code
32
32
33
34
36
38
39
When the telephone rings
Viewing the Caller ID Message list
Deleting information from the Caller ID list
Using the Caller ID list
Using “Caller ID on call waiting“ service
Call Waiting Features
Basics
Making a call
Receiving a call
Adjusting the volume
Redialing a call
Traveling out-of-range
14
16
18
19
20
Additional Information
Changing the digital security code
Installing the beltclip
Headset installation
Note on power sources
Maintenance
Troubleshooting
General Information
Index
40
41
41
42
43
44
46
49
Memory Dialing
Storing phone numbers and names
Making calls with memory dialing
Editing a stored name and/ or phone number
Erasing a stored name and phone number
21
24
26
27
Muat Turun from Www.Somanuals.com. All Manuals Search And Muat Turun.
Welcome
Features
Congratulations on your purchase of the TRU 3465 cordless telephone. This
phone is designed for reliability, long life and outstanding performance
utilizing the latest in 2.4 GHz Spread Spectrum Technology.
Note: Some illustrations in this manual may differ from the actual unit for
explanation purposes.
• 2.4 GHz Spread Spectrum Technology
• Secure Digit al Transmission
• Caller ID and Call Waiting Caller ID
• Advanced Caller ID with Call Waiting Options
• 50 Number Caller ID Memory
• 30 Number Memory (20 on the handset and 10 on the base)
• 3 Line Backlit Display
• 3 Redial Memories (up to 32 digit)
• Flash and Pause
• Pulse / Tone Dialing
• 7 Day Standby Battery Life
• 6 Hour Talk Time
• Handset Earpiece and Ringer Volume Control
• Base Speakerphone with Keypad
• 3-Way Conference Operation
• Dual Keypad Operation
[ 2 ]
I N TR O D U C TI O N / FE ATU R E S
Muat Turun from Www.Somanuals.com. All Manuals Search And Muat Turun.
Digital Spread Spectrum Technology
utilizes a “wider frequency band“ vs. a
“single narrow band“ used in standard digit al transmissions. The 2.4 GHz
frequency range was recently released to commercial communications. The
result is a more secure conversation with the clarity of digit al sound, extended
range, and minimal interference from other cordless phones.
TM digit al security automatically selects one of over 65,000 codes
Random Code
for the handset and base.
These features enhance your phone´s security and also prevent unauthorized
calls as a result of your phone being activated by other equipment.
UnidenTM is a registered trademark of Uniden America Corporation.
AutoTalkTM and Random CodeTM are trademarks of Uniden America Corporation.
Throughout this manual, terms such as Standby and Talk Mode are used.
Below is the terminology explanation:
talk
Standby Mode
•
•
- The handset is not in use, off of the base and
has not been pressed. A dial tone is not present and the display
is blank.
talk
Talk Mode
- The handset is not on the base and
has been pressed
enabling a dial tone. Talkappears on the display.
I N TR O D U C TI O N / FE ATU R E S [ 3 ]
Muat Turun from Www.Somanuals.com. All Manuals Search And Muat Turun.
Controls and Functions
1. Handset Antenna
2. Headset Jack Cover
3. Handset Battery Compartment
4. Handset Earpiece
5. LCD Display
1
2
6. Volume Up Key
7. Memory Key
4
8. Talk Key
5
6
7
8
9
9. Volume Down Key
10. Tone/ Left Cursor Key
11. Redial/ Pause Key
12. Options Key
14
15
13. Handset Microphone
14. Flash Key
15. Caller ID Key
16. Right Cursor Key
17. Delete/ Intercom Key
18. Select/ Channel Key
19. Handset Charging Cont acts
16
10
3
11
12
13
17
18
19
[ 4 ]
C O N TR O LS A N D FU N C TI O N S
Muat Turun from Www.Somanuals.com. All Manuals Search And Muat Turun.
20. Base Charging Cont acts
21. Base Speaker
22. Tone Key
23. Speaker LED
24. Status LED
23
24
25
26
27
28
20
25. Power LED
26. Intercom Key
27. Redial/ Pause Key
28. Memory Key
29. Base Antenna
30. Flash Key
21
22
32
33
29
30
31
31. Speaker Key
32. Base Speaker Volume Adjust
33. Base Microphone
34. Base Ringer Switch
35. Pulse-Tone Switch
36. DC Power Input
37. Phone Jack
34 35 36 37
C O N TR O LS A N D FU N C TI O N S [ 5 ]
Muat Turun from Www.Somanuals.com. All Manuals Search And Muat Turun.
Read This First
This cordless telephone must be set up before use. Follow these steps;
Step 1 (page 7)
Unpack the telephone and accessories.
Step 2 (page 8 to 9)
Next, choose the best location to
set up the base unit.
Base unit
About the digital security code
Step 3 (page 10 to 11)
This cordless telephone uses a digit al
security code to prevent unauthorized
access to your base unit. This
security code prevents other cordless
handsets from making calls through
your base unit.
Then, insert the battery pack into the
handset. You must charge the battery pack
15 hours before using the phone
for
.
Handset
A random security code will be
assigned automatically between your
base unit and handset when you
charge the battery pack for the
first time.
Step 4 (page 12 to 13)
Finally, set the Caller ID options and
store your area code in the memory to
use the Caller ID service.
Note:
Skip the area code setting if your
Handset
If you want to reset the security
code, see page 40.
calling area requires 10-digit dialing.
[ 6 ]
G E TTI N G S TA R TE D
Muat Turun from Www.Somanuals.com. All Manuals Search And Muat Turun.
Checking the Package Contents
Make sure you have received the following items in the package.
If any of these items are missing or damaged, cont act the Uniden Parts
Department (see below).
• Base unit
• Handset
• AC adapter (AD-312)
• Rechargeable
battery pack
(BT-905)
• This Owner s Manual
• Quick Reference Guide
• Precautions and Important
Safety Instructions
• Registration Card
• Telephone line cord
• Beltclip
Uniden Parts Department
(800) 554-3988
Hours: M-F 7:00 AM to 5:00 PM CST.
We can also be reached on the web at www.uniden.com.
G E TTI N G S TA R TE D [ 7 ]
Muat Turun from Www.Somanuals.com. All Manuals Search And Muat Turun.
Setting Up the Base Unit
Do the following steps.
• Choose the best location
• Connect the base unit
• Choose the dialing mode
Choose the best location
Before choosing a location for your new phone, read the INSTALLATION CONSIDERATIONS included
in the PRECAUTIONS AND IMPORTANT SAFETY INSTRUCTIONS brochure. Here are some important
guidelines you should consider:
Avoid noise sources such as a window
by a street with heavy traffic
Avoid heat sources, such as
radiators, air ducts, and sunlight
Avoid microwave ovens
Avoid excessive moisture, extremely low
temperatures, dust, mechanical vibration, or shock
Avoid television sets and
other electronic equipment
Avoid personal computers
Avoid other cordless telephones
Choose a central location
15 hours
• After installing the battery pack in the handset, you should charge your handset for
before using the phone
. Once the handset battery pack is fully charged, you may connect the
telephone line cord to the base and telephone wall outlet.
• The location should be close to both a phone jack and a continuous power outlet which is
not switchable.
• Keep the base and handset away from sources of electrical noise such as motors and
fluorescent lighting.
• Be sure there is sufficient space to raise the base antenna to a vertical position.
[ 8 ]
G E TTI N G S TA R TE D
Muat Turun from Www.Somanuals.com. All Manuals Search And Muat Turun.
Connect the base unit
1
2
3
Connect the telephone line cord to
TEL LINE
telephone outlet.
the
jack and to a
• Place the power cord so
it does not create a trip
hazard or where it could
become chafed and
create a fire or electrical
hazard.
DC
Connect the AC adapter to the
IN 9V
jack and to a standard 120V
AC wall outlet.
Set the base unit on a desk or
tabletop and place the handset on
the base unit as shown. Then raise
the antenna to a vertical position.
• Use only the supplied
AD-312 AC adapter. Do
not use any other AC
adapter.
If your telephone outlet isn´t modular, cont act
your telephone company for assistance.
• Connect the AC adapter
to a continuous power
supply.
Modular
Choose the dialing mode
• Place the base unit close
to the AC outlet so that
you can unplug the AC
adapter easily.
PULSE-TONE
Depending on your dialing system, set the
switch as follows:
If your dialing system is
Set the switch to
Tone
TONE
Pulse
PULSE
If you aren´t sure of your dialing system,
PULSE-TONE
make a trial call with the
TONE
switch
set to
If the call connects, leave the switch as is;
PULSE
.
otherwise, set to
.
G E TTI N G S TA R TE D [ 9 ]
Muat Turun from Www.Somanuals.com. All Manuals Search And Muat Turun.
Installing the Handset Battery Pack
Charge the battery pack for 15 hours before you start using your phone.
1
2
Press in on the battery cover release and slide the
cover down until it comes off.
Connect the battery pack connector with the
correct polarity (black and red wires), then insert
the battery pack into the battery compartment.
3
Slide the battery cover forward until it snaps
into place.
4
5
Place the handset on the base.
status
Make sure that the “
“ LED lights. If the LED
doesn´t light, check to see that the AC adapter is
plugged in and that the handset makes good
cont act with the base charging cont acts.
Use only the Uniden Battery (BT-905) supplied with
your phone. Replacement batteries are also available
through the Uniden Parts Department (See page 7).
[ 10 ] G E TTI N G S TA R TE D
Muat Turun from Www.Somanuals.com. All Manuals Search And Muat Turun.
Battery use time (per charge)
From fully charged
• 6 hours continuous use.
• 7 days when the handset is in the standby mode.
• Even when the battery
pack is not being used,
it will gradually
When the battery charge becomes low
discharge over a long
period of time. For
When the volt age of battery pack in the handset is very
low and needs to be charged, the phone is programmed
to eliminate functions in order to save power. If the
battery charge becomes low, “Low Battery“ appears
on the LCD. If the phone is in use, the handset beeps.
Complete your conversation as quickly as possible and
return the handset to the base unit for charging.
optimum performance,
be sure to return the
handset to the base unit
after a telephone call for
charging the battery.
• The built-in memory
backup can hold
numbers and names
stored in the memory
for up to 2 minutes,
while you replace the
battery pack.
Cleaning the charging contacts
To maint ain a good charge, it is important
to clean the battery cont acts on the handset
and base unit with a dry cloth or a pencil
eraser about once a month.
• If you must replace the
battery pack during a
telephone call, complete
the replacement of the
battery pack within
30 seconds, and you
can return to the
Do not use any liquids or solvents.
original call.
G E TTI N G S TA R TE D [ 11 ]
Muat Turun from Www.Somanuals.com. All Manuals Search And Muat Turun.
Setting Caller ID Options
There are three Caller ID setup options available; they are AutoTalk, CIDCW (Caller
ID on Call Waiting), and Area Code. See page 13 for Area Code setup instructions.
You must subscribe to
Caller ID on Call Waiting in
order to use this feature.
TM allows you to answer the phone without pressing the
button. If the
talk
AutoTalk
phone rings when AutoTalk is on, simply remove the handset from the base and the
phone automatically answers the call. Or if the handset is not on the base, press
any key to answer the call. If the phone rings when AutoTalk is off, you must
press
to answer the call.
talk
Caller ID on Call Waiting (CIDCW)
performs the same as regular Caller ID on a call
waiting number. Call waiting options allow you to handle call waiting calls in seven
different ways. (See page 39.)
You must subscribe to CIDCW from your phone company in order to use this feature.
To change your Caller ID options:
1
2
Press
Use
. The following screen appears.
•
ª
and
or a number key (1-3) to move the pointer to the selection that
you would like to change.
Press
to toggle between “On“ and “Off“ for “Auto Talk“ .
For “CIDCW“, choose “On“ , “Off“, or “Opt“ depending upon the type of
service to which you subscribe.
3
After you have made your Caller ID selections, press
handset to the base.
and return the
[ 12 ] G E TTI N G S TA R TE D
Muat Turun from Www.Somanuals.com. All Manuals Search And Muat Turun.
Entering Your Area Code
If you enter a 3-digit area code number in the Area Codeoption, your local
area code does not appear in Caller ID messages. Do not program this option
if your calling area requires 10-digit dialing. When reviewing Caller ID
messages, you will see only the local seven digit number. For calls received
from outside your local area code, you will see a full 10-digit number.
If your calling area requires
10-digit dialing, do not
program this option.
1
2
3
When the phone is in the standby mode, press
The Caller ID setting screen appears.
.
Press
to select “Area Code“ .
3
Press
.
4
5
6
Use the number keypad (
to
) to enter the 3-digit area code.
0
9
Press
. A tone sounds and the displayed area code is entered.
Press
to complete the setting. Or return the handset to the base
unit to complete the setting. The handset returns to the standby mode.
When the area code has already been stored in memory, the
stored area code will be displayed. To change it, use the
delete/int com
and number keypad to enter the new area
code. Then press
.
To complete the setting, press
to the base unit.
or return the handset
G E TTI N G S TA R TE D [ 13 ]
Muat Turun from Www.Somanuals.com. All Manuals Search And Muat Turun.
Making a Call
Dialing from Standby Mode
talk
1
Enter the phone number and press
flashes on the display.
. “Talk“
Talk
8178583300
delete/int com
• Press
you enter a wrong
if
Then current volume setting is displayed.
number at the step 1. To
delete all the numbers
that you have entered,
press and hold
Talk
<High>
2
3
Talk
8178583300
0:00
The number is dialed. After about 5 seconds, the
call-time display appears.
delete/int com
until the
display clears.
• You must press a key
within 20 seconds or the
phone will return to
standby.
talk
To hang up, press
or place the handset on the base.
The call-time will be displayed for about 5 seconds.
Other Operations
• Refer to terminology
explanation on Page 3,
if necessary.
To
Do this
Press
Press
Press
To improve the reception
To adjust the earpiece volume
To temporarily switch to tone dial
during a call.
during a call.
. The following numbers
•
ª
or
(When the base is set to pulse mode) will be sent as tone dialing.
To enter a pause within the dialing
sequence
Press
. “P“ appears on the
display which represents a pause.
[ 14 ] B A S I C S
Muat Turun from Www.Somanuals.com. All Manuals Search And Muat Turun.
Dialing from Talk Mode
1
Press
. “Talk“ flashes on the display.
talk
Talk
Then current volume setting is displayed.
Talk
8178583300
0:17
2
3
Dial the phone number.
Example
: Enter 8178583300
10:03
talk
To hang up, press
or place the handset on the base.
The call-time will be displayed for about 5 seconds.
From the base
speaker
1
2
3
Press
.
Dial the number on the keypad.
When you finish the call, press
The base microphone is
located under the phone.
Position yourself as near to
the base as possible and
speak clearly.
speaker
to hang up.
Microphone
B A S I C S [ 15 ]
Muat Turun from Www.Somanuals.com. All Manuals Search And Muat Turun.
Receiving a Call
From the handset
1
The phone rings.
Incoming Call
Talk
0:00
0:02
talk
2
Press
. “Talk“ and volume setting appear
<Normal>
on the display.
Talk
3
4
Talk with the caller.
talk
To hang up, press
or place the handset on
115:35
the base. The call-time will be displayed for about
5 seconds.
AutoTalk when ringing
When the AutoTalk setting is on and there is an incoming call, simply lift the
handset from the base unit to answer the phone. See “Setting Caller ID options“
on page 12 for more det ails.
Any key answer when ringing
When the AutoTalk setting is on and the handset is off the base, press any
handset key to answer the incoming call.
Call Waiting
Note: You must subscribe to Call Waiting service to use this feature.
flash
When a call is received during a telephone call already in progress, press
to
switch to the new call. If you also subscribe to Call Waiting on Caller ID, you will
see the name and number of the caller in call waiting. (See page 38.)
[ 16 ] B A S I C S
Muat Turun from Www.Somanuals.com. All Manuals Search And Muat Turun.
From the base
1
status
LED on the
The phone rings. The
base flashes.
2
3
speaker
Press
and begin speaking.
The base microphone is
located under the phone.
Position yourself as near to
the base as possible and
speak clearly.
To hang up, press
speaker
.
Microphone
B A S I C S [ 17 ]
Muat Turun from Www.Somanuals.com. All Manuals Search And Muat Turun.
Adjusting the Volume
Handset ringer tone and volume
Ringer A High
•
ª
•
Press
or
in Standby mode to select one of
ª
Ringer A Low
four ringer tone and volume combinations.
(Refer to terminology explanation on Page 3
if necessary.)
•
ª
Ringer B High
•
ª
Ringer B Low
Earpiece volume
•
Pressing
or
during a call will change the earpiece volume of the
ª
handset. This setting will remain in effect after the telephone call has ended.
ª
ª
ª
<Loud>
<High>
<Medium>
<Normal>
•
•
•
•
When you press
in Loud mode or
in Normal mode, an error tone sounds.
ª
Base ringer switch
This switch turns the base ringer on or off.
Base speaker volume
To control the speaker volume of the base, adjust
the volume slide control as desired.
[ 18 ] B A S I C S
Muat Turun from Www.Somanuals.com. All Manuals Search And Muat Turun.
Redialing a Call
The last three phone numbers dialed can be quickly redialed.
Redialing from Standby Mode
• If the number exceeds
32 digits, only the first
32 digits are retained
for redialed.
1
Press
The phone number that was last dialed appears on the display.
Press again.
.
2
Each press of
will display one of the last three numbers dialed.
• Press and hold
delete/int com
to delete
the displayed redial
number.
Most
recent
• Refer to terminology
explanation on Page 3,
if necessary.
talk
3
4
5
Press
. “Talk“ appears on the display, then the volume setting
is displayed.
Then the selected number is dialed. After about 5 seconds, the call-time
display appears.
To hang up, press
talk
or place the handset on the base. The call-time
will be displayed for about 5 seconds.
B A S I C S [ 19 ]
Muat Turun from Www.Somanuals.com. All Manuals Search And Muat Turun.
Redial from Talk Mode
talk
1
Press
. “Talk“ appears on the display.
Talk
Talk
<High>
Only the last number
dialed can be accessed
talk
2
3
Press
. The last number dialed will be displayed and redialed.
after
has been
pressed.
talk
To hang up, press
or place the handset on the base. The call-time will
be displayed for about 5 seconds.
From the Base
1
2
3
To call the last number dialed from the base,
speaker
press
.
redial/p
Press
. The last number dialed from the
base is redialed.
speaker
To hang up, press
.
Traveling Out-of-Range
During a call, as you begin to move your handset too
far from your base unit, noise increases. If you pass
the range limits of the base unit, your call will
terminate within 30 seconds.
[ 20 ] B A S I C S
Muat Turun from Www.Somanuals.com. All Manuals Search And Muat Turun.
Storing Phone Numbers and Names
Memory Dialing allows you to dial a number using just a few key strokes.
Your TRU 3465 stores up to 20 names/ numbers in handset plus 10 numbers
in the base.
In memory dialing
operation, you must press
a key within 20 seconds or
the phone will return to
standby. If you return the
handset to the base, the
phone will return to
With the handset
Memory Store
1
Press and hold
is displayed.
unt il “Memory Store“
01
02
standby also.
•
ª
2
Press
and
or enter a two-digit number (01 - 20)
to select the memory location where you would like
to store the number.
3
Press
.
Store Name
The following screen appears and a cursor flashes
indicating that the display is ready for the name to be
entered.
If this screen appears, the selected memory location is
already stored. Then you must either change the entry
in this location, clear the entry in this location, or
select “Go Back“ to choose another location.
Edit Memory07
Delete Memory07
Go Back
•
#
delete/int com
ª
4
Use
,
,
,
, or
to enter the name. The name
cannot exceed 13 characters.
M E M O RY D I A LI N G [ 21 ]
Muat Turun from Www.Somanuals.com. All Manuals Search And Muat Turun.
•
ª
• Use
and
to scroll through the character menu. It cont ains upper and
lower case letters and various characters.
#
• Use
• Use
and
to move the cursor to the desired location.
to delete characters as needed.
delete/int com
5
6
Press
.
The pause feature is useful
for long distance calling,
credit card dialing, or
sequences that require a
pause between digits.
Store Number
“ Store Number“ is displayed. The cursor flashes
indicating that the display is ready for the number
to be entered.
Use the number keypad to enter the phone number.
The phone number cannot exceed 20 digits.
• Use
The display shows a “P“. Each pause counts as one
digit and represents a two second delay of time
between the digits.
Store Number
8178583300
to enter pause in the dialing sequence.
• Use
to delete digits as needed.
delete/int com
7
Press
.
The handset beeps and displays the confirmation
screen. Memory storage is complete.
Memory07 Stored
For example, if you store a name and number into
memory location number 07, the display shows
“ Memory07 Stored“. After about 2 seconds,
“ Memory Store“ is displayed.
Memory Store
07 UNIDEN CORP
08
8
Press
to return to standby mode.
[ 22 ] M E M O RY D I A LI N G
Muat Turun from Www.Somanuals.com. All Manuals Search And Muat Turun.
With the Base
1
2
status
LED blinks.
Press
. The
Dial the number you wish to store.
(The phone number cannot exceed 20 digits.)
The 10 memory locations
in the base are
independent locations
from the handset.
3
Press
. Enter the memory location number
status
(0-9) on the keypad. The
A confirmation tone sounds and the number
is stored.
LED goes out.
The 10 memory locations are represented by the numbers 0-9 on the keypad. If you
store a number in one of these locations, then attempt to store a different number in
the same location later, the new number will overwrite the previous one.
M E M O RY D I A LI N G [ 23 ]
Muat Turun from Www.Somanuals.com. All Manuals Search And Muat Turun.
Making Calls with Memory Dialing
Memory dialing from Standby Mode
1
Press
.
01 UNIDEN CORP
02 JOHN DOE
03 MOM AND DAD
The handset displays your programmed
memory locations.
If you press
talk
before
, you can
confirm the name and
number stored in the
•
ª
2
3
Press
and
or enter a two-digit number (01 - 20)
selected memory location.
To exit this mode, press
to select the memory location you would like to dial.
delete/int com
and hold
Talk
0123456789012
talk
Press
. “Talk“ and the volume setting appear on
until the display clears.
the display. Then the displayed number is dialed.
Display a Programmed Number
#
Use
and
to toggle between the names display
and the numbers display.
Program number
01 8178583300
02 5452930
1 03 8175551212
Program name
01 UNIDEN CORP
02 JOHN DOE
03 MOM AND DAD
1
When the stored phone number has 14 or more digits,
“ \“ is displayed next to the 12th digit. Press to
see the extra digits and to return.
05 012345678901
06 011813554329
07
#
[ 24 ] M E M O RY D I A LI N G
Muat Turun from Www.Somanuals.com. All Manuals Search And Muat Turun.
Memory dialing from Talk Mode
talk
1
2
3
Press
. “Talk“ and the
Talk
Talk
<High>
volume setting appear.
Press
.
Talk
0:00
• To exit the memory
function without
dialing, press
. The
handset returns to
standby.
Enter a two-digit number (01 - 20) to select the
memory location of the desired phone number.
The selected phone number is displayed. Then the
number is dialed.
Talk 0:35
0123456789012
• Whenever you are
using a menu screen,
you must press a key
within 20 seconds or
the phone will return
to standby.
With the Base
1
2
speaker
Press
Press
.
. Enter the memory location number
(0-9) to dial the number.
M E M O RY D I A LI N G [ 25 ]
Muat Turun from Www.Somanuals.com. All Manuals Search And Muat Turun.
Editing a Stored Name and/or Phone Number
1
2
3
Press and hold
is displayed.
unt il “Memory Store“
Memory Store
01 UNIDEN CORP
02 JOHN DOE
•
ª
Press
and
or enter a two-digit number (01 - 20)
to select the memory location you would like to edit.
Press
.
Edit Memory01
Delete Memory01
Go Back
The following screen appears with the memory location
number that you have selected in the display.
•
ª
4
Press
or
to select “Edit Memory“, then press
. The following screen appears.
Store Name
UNIDEN CORP
The cursor flashes indicating that the display is ready
for the name to be edited. When a name has not been
stored, the cursor appears at the beginning of the
second line.
•
delete/int com
ª
5
6
Press
,
,
,
, or
to edit
the name. (See page 22.)
To edit only the phone number, skip this step.
Press
. The following screen appears.
Store Number
817858330
The cursor flashes indicating that the display is ready
for the number to be edited.
[ 26 ] M E M O RY D I A LI N G
Muat Turun from Www.Somanuals.com. All Manuals Search And Muat Turun.
delete/int com
7
8
Use the number keypad,
or
to edit the phone number.
The phone number cannot exceed 20 digits. (See page 22.)
If you don´t want to change the phone number, skip this step.
Press
. The handset beeps and displays the
Memory01 Stored
confirmation screen. The memory storage is complete.
For example, if you store a name and number into
memory location number 01, the display shows
“ Memory01 Stored“. After about 2 seconds,
“ Memory Store“ is displayed.
To edit the numbers that
you have stored in the
base, simply overwrite the
existing number. Refer to
“ Storing Phone Numbers
and Names; With the
Memory Store
01 UNIDEN CORP
02 JOHN DOE
Base“ on page 23.
9
Press
to return to standby mode.
Erasing a Stored Name and Phone Number
1
2
3
Press and hold
is displayed.
unt il “Memory Store“
Memory Store
01 UNIDEN CORP
02 JOHN DOE
•
ª
Press
and
or enter a two-digit number (01 - 20)
to select the memory location you would like to edit.
Press
.
Edit Memory02
Delete Memory02
Go Back
The following screen appears with the memory location
number that you have selected in the display.
Edit Memory02
Delete Memory02
Go Back
ª
4
Press
to move the pointer down to “Delete
Memory“ command line.
M E M O RY D I A LI N G [ 27 ]
Muat Turun from Www.Somanuals.com. All Manuals Search And Muat Turun.
5
Press
screen appears.
. The following confirmation
Delete Memory02?
Yes
No
•
6
7
Press
to move the pointer to “Yes“ .
delete/int com
Press
or
.
There is a confirmation tone and the entry is deleted.
The following screen appears.
Memory02 Deleted
8
After a few seconds the display returns to the
“ Memory Store“ screen.
You may select another number to delete (return to
Memory Store
02
03 MOM AND DAD
step 2) or press
to return to standby.
With the Base
1
2
3
Press
Press
.
again.
Enter the memory location number (0-9) of the
status
number you wish to delete. The
LED goes
out. A confirmation tone indicates the number
has been erased.
[ 28 ] M E M O RY D I A LI N G
Muat Turun from Www.Somanuals.com. All Manuals Search And Muat Turun.
3-way Conferencing
The Uniden TRU 3465 permits 3-way conversations between
the handset, base and outside line.
speaker
• Pressing the
When speaking on the handset
key on the base while
dialing with the handset
will set the 3-way
conversation mode, and
dialing is not affected.
speaker
1
2
Press
on the base
to join the 3-way conversation.
• During a 3-way
conversation, you can
only dial from the
handset.
speaker
To hang up, press
on
the base. The handset will still
be connected to the call.
Microphone
When speaking on the base
talk
1
2
Press
on the handset to join the
3-way conversation.
To hang up, return the handset to the
base, or press
talk
on the handset.
The base will still be connected to
the call.
TE LE P HO N E FE ATU R E S [ 29 ]
Muat Turun from Www.Somanuals.com. All Manuals Search And Muat Turun.
Intercom Feature
Intercom from the base to handset
intercom
intercom
1
2
3
Press
on the base. The handset beeps. (If no answer, press
again to disconnect.)
If the page is not answered
within one minute, the
paging sounds stops
automatically.
delete/int com
talk
Press
or
on the handset to answer. “Intercom“ appears
on the display.
talk
speaker
To turn off the intercom, press
on the handset or
on the base.
Intercom from the handset to base
delete/int com
delete/int com
1
2
3
Press
on the handset. (If no answer, press
again
to disconnect.)
intercom
speaker
talk
At the base, press
base microphone.
or
to answer. Speak into the
speaker
To turn off the intercom, press
on the handset or
on the base.
[ 30 ] TE LE P HO N E FE ATU R E S
Muat Turun from Www.Somanuals.com. All Manuals Search And Muat Turun.
Call Transfer Feature
To Transfer from the Handset to the Base
delete/int com
1
2
3
Press
on the handset. The caller is put on hold and the
intercom tone sounds on the base.
intercom
speaker
Press
or
on the base. The intercom mode is activated,
but the caller is still on hold.
talk
To transfer the call to the base, press
on the handset. To cancel the
speaker
transfer, press
on the base.
To Transfer from the Base to the Handset
intercom
1
2
3
Press
on the base. The caller is put on hold and the intercom
tone sounds on the handset.
delete/int com
talk
Press
or
on the handset. The intercom mode is
activated, but the caller is still on hold.
speaker
To transfer the call to the handset, press
the transfer, press
on the base. To cancel
talk
on the handset.
TE LE P HO N E FE ATU R E S [ 31 ]
Muat Turun from Www.Somanuals.com. All Manuals Search And Muat Turun.
Caller ID
You must subscribe to Caller ID service to use this feature.
When the telephone rings, the Caller ID feature allows you to view the
caller´s name and phone number on the display before you answer the phone.
The handset displays the phone number of the incoming call, the name, time,
and the number of calls. Additionally, you can dial the displayed number and
store the information for memory dialing. Make sure you have turned on the
Caller ID/ Call Waiting feature (See page 12).
• If you answer a call
before the Caller ID
message is received
(Example: before the
second ring), the Caller
ID message will not
appear.
When the Telephone Rings
1
When the Caller ID message is received, the display shows the caller´s
phone number along with the date and time. The incoming call information
is stored in the Caller ID record.
If the Caller ID service includes the caller´s name, the caller´s name
appears on the display (up to 15 letters).
• When the call is received
via a telephone company
that does not offer
Caller ID service, the
caller´s phone number
and name do not appear.
(This includes
The date and
time received
Number of calls
from the same caller
5/11 12:30PM 01
UNIDEN CORP
817-858-3300
Caller's name
Caller's phone number
Here are some typical displays;
international calls.)
When the phone number and
name data are received
• When the call is via a
private branch exchange
(PBX), the caller´s
When invalid data is received
phone number and name
may not appear.
[ 32 ] C A LLE R I D FE ATU R E S
Muat Turun from Www.Somanuals.com. All Manuals Search And Muat Turun.
When a private name is received
When a private number is received
• In Caller ID operation,
if no key is pressed for
more than 20 seconds,
an error tone sounds
and the telephone
returns to the standby
mode.
When an unknown name is received When an unknown number is received
2
When you pick up the phone, the display changes to “Talk“ .
• If a call comes in via a
telephone system that
does not offer Caller ID
service, no information
is stored.
5/11 12:30PM 01
UNI EN CORP
813-8 -3300
Dat a errors appear as “
“ .
2 2
Viewing the Caller ID Message List
•
“End“ appears when
you have reviewed all
messages in the Caller
The Caller ID list stores information for up to 50 incoming calls - even
unanswered calls.
•
ID list. Press
repeatedly to return to
the summary screen.
cid
1
Press
. The summary screen appears. The screen
New :01
Total:02
shows the number of new messages and tot al messages.
• Each message can be up
to 15 characters for the
phone number and the
name.
5/17 12:30PM 03
UNIDEN CORP
817-858-3300
ª
2
Press
to display the latest Caller ID message.
•
ª
3
4
Press
Press
to see the next message. Or press
to see previous message.
cid
to return to standby.
C A LLE R I D FE ATU R E S [ 33 ]
Muat Turun from Www.Somanuals.com. All Manuals Search And Muat Turun.
Deleting Information from the Caller ID List
The TRU 3465 stores up to 50 messages. If the phone receives the 51st
message, the oldest one in the list is automatically deleted. Caller ID dat a
can also be deleted manually.
If you get an incoming call
or page, the deleting
operation is canceled and
the telephone returns to
standby so you can answer
the call or page.
Deleting a Caller ID message
cid
1
Press
. Display the message to be deleted from
5/17 12:30PM 03
UNIDEN CORP
817-858-3300
•
ª
the Caller ID list by pressing
or
.
Delete Message?
Yes
No
delete/int com
2
Press
.
•
ª
3
4
Press
Press
or
to select “Yes“ or “No“ .
delete/int com
or
.
When the pointer is at “
“ :
Yes
A tone sounds and the Caller ID message is deleted. The next Caller
ID message is then displayed.
When the pointer is at “ “ :
No
The display returns to the Caller ID message.
[ 34 ] C A LLE R I D FE ATU R E S
Muat Turun from Www.Somanuals.com. All Manuals Search And Muat Turun.
Deleting all Caller ID names/ numbers
cid
1
Press
.
New :01
Total:02
Delete All?
Yes
No
While using the “Delete
All?“ screen if no key is
pressed for more than 20
seconds, an error tone
sounds and the telephone
returns to standby.
delete/int com
2
Press
.
•
ª
3
4
Press
Press
or
to select “Yes“ or “No“ .
delete/int com
or
.
When the pointer is at “
“ :
Yes
A tone sounds and all stored Caller ID messages
are deleted.
Total:00
When the pointer is at “ “ :
No
The display returns to the summary screen.
New :01
Total:02
C A LLE R I D FE ATU R E S [ 35 ]
Muat Turun from Www.Somanuals.com. All Manuals Search And Muat Turun.
Using the Caller ID List
Calling a party from the Caller ID list
You can place a call from the Caller ID list. The TRU 3465 stores up to
50 messages.
• You cannot make a call
from the Caller ID list if
your TRU 3465 is
connected to private
branch exchange (PBX).
5/17 12:30PM 03
UNIDEN CORP
817-858-3300
cid
1
2
Press
. Select the phone number that you want to
•
ª
dial by pressing
or
.
• When a long distance
call has been set, “1“
appears in the display.
talk
Talk
8178583300
Press
. The displayed phone number
dials automatically.
Long Distance calls and Area Code setting/ cancellation
1
Pressing
while the incoming call information is displayed (in step 1) will
3
set or cancel a long distance call. Pressing
code setting.
will set or cancel an area
Dial edit
You can edit the phone number of Caller ID dat a when you press
after the step 1.
[ 36 ] C A LLE R I D FE ATU R E S
Muat Turun from Www.Somanuals.com. All Manuals Search And Muat Turun.
Storing Caller ID messages in Memory dialing
Messages shown in the Caller ID list can be stored in memory dialing.
Using the incoming call information (i.e., Caller ID list), the phone number
of the party on the Caller ID list can be stored in memory dialing.
cid
1
Press
.
5/17 12:30PM 03
UNIDEN CORP
817-858-3300
Select the phone number to be stored from the
Caller ID list by pressing
• You can not store
a Caller ID message if no
phone number appears
in the message.
•
ª
or
.
2
3
4
Press
.
Select Location
01 UNIDEN CORP
02 JONE DOE
• If there is an incoming
call or page, memory
storage is canceled and
the telephone is set to
receive the incoming call
or page.
•
ª
Press
and
or enter a two-digit number (01 - 20)
to select the memory location to be stored.
Press
.
5/17 12:30PM 03
UNIDEN CORP
817-858-3300
A tone will sound. The number is stored in memory,
and the display returns to the Caller ID list.
If a message has already been stored in the selected
Replace Memory?
Yes
No
memory number location, a confirmation screen is
•
displayed. Press
to select “Yes“. Press
to overwrite. The display returns to the Caller ID list.
C A LLE R I D FE ATU R E S [ 37 ]
Muat Turun from Www.Somanuals.com. All Manuals Search And Muat Turun.
Using “Caller ID on Call Waiting” Service
“Caller ID“ and “Call waiting“ are separate services. CIDCW (Caller ID on
Call Waiting) performs the same as regular Caller ID on a call waiting number.
You must subscribe to the “Caller ID on call waiting (CIDCW) services“ before
you can use the following features. The “Call waiting“ service can also be
used independently. Please contact your local telephone company for details.
1
2
3
When a new incoming call arrives during your current
telephone call, the phone number and the name of the
caller are displayed.
Talk 10:30
UNIDEN CORP
817-858-3300
flash
Press
.
You will be able to t alk with the second caller. The first
caller will be put on hold.
flash
To return to the first caller, press
again.
When CIDCW is set to “Opt“ in the Caller ID setup menu (See page 12),
you can press the key after receiving a call waiting call and view
a list of ways to handle the new call. Choose an option using the
•
and
ª
keys and press
to activate.
[ 38 ] C A LLE R I D FE ATU R E S
Muat Turun from Www.Somanuals.com. All Manuals Search And Muat Turun.
Call Waiting Features
Your TRU 3465 gives you new options for call waiting. At the touch of a
button, you can ask the caller to hold, send them to your voice mail service,
or conference them into your current call. You may be required to subscribe to
call waiting and call waiting options to use these features. Not all features are
available in all areas. Check with your local telephone company for det ails.
1
2
When you receive a call waiting call, press
for a list of options.
•
ª
Press the
or
key to select an option.
or
or
3
Press
.
A confirmation screen will appear.
Your TRU 3465 is pre-programmed with seven call waiting options. You may
select to ask the calling party to hold, send them a busy message, forward
them to your voice mail, or conference them into the current call. You may
also select to answer and drop the first caller or, at any time, choose to
drop the first or drop the last caller.
Check with your local telephone company for a full list of options.
flash
You can also answer a call waiting call immediately by pressing the
first caller will be placed on hold. To return to the original caller, press
key, the
flash
again.
C A LLE R I D FE ATU R E S [ 39 ]
Muat Turun from Www.Somanuals.com. All Manuals Search And Muat Turun.
Changing the Digital Security Code
The digit al security code is an identification code used to connect the
handset and the base unit. Normally, setting the code is not necessary.
The first time you charge your handset, the security code is automatically set.
(See page 6.)
In the rare situation that you suspect another cordless telephone is using the
same security code, you can change the code.
If the handset battery pack
is completely discharged or
the battery pack is
removed, the digital
security code will be lost.
If this happens, a new
security code is set
automatically next time the
battery pack is charged.
1
2
Remove the handset from the base unit.
intercom
Press
on the base.
While the handset is emitting the paging
sound, replace the handset to the base unit.
The paging tone stops.
Leave the handset on the base for more than
3 seconds. A random, new security code is set.
[ 40 ] A D D I TI O N A L I N FO R M ATI O N
Muat Turun from Www.Somanuals.com. All Manuals Search And Muat Turun.
Installing the Beltclip
To attach the beltclip
To remove the beltclip
Insert the beltclip into the holes on
each side of the handset. Press down
until it clicks.
Pull both sides of the beltclip to
release the t abs from the holes.
Headset Installation
Your phone may be used with an optional headset, the Uniden
HS910. To use this feature, insert headset plug into the
headset jack. Your phone is ready for hands-free
conversations. (Headsets may be purchased by calling the
Uniden Parts Department or visiting the website. See Page 7.)
A D D I TI O N A L I N FO R M ATI O N [ 41 ]
Muat Turun from Www.Somanuals.com. All Manuals Search And Muat Turun.
Note on Power Sources
Battery replacement and handling
When the operating time becomes short, even after a battery is recharged,
please replace the battery. With normal usage, your battery should last about
one year.
Please cont act your place of purchase or the Uniden Parts Department for a
replacement battery. (See Page 7.)
Power Failure
During the period that the power is off, you will not be able to make or
receive calls with the telephone.
RECYCLING NICKEL-CADMIUM BATTERIES
NICKEL-CADMIUM BATTERIES MUST BE DISPOSED OF PROPERLY.
Nickel-cadmium cells are used in the battery pack. Please t ake
your used nickel-cadmium battery packs to a store that
recycles nickel-cadmium batteries.
Caution
• Use the specified battery pack.
• Do not remove the battery from the handset to charge it.
• Never throw the battery into a fire, disassemble it, or heat it.
• Do not remove or damage the battery casing.
[ 42 ] A D D I TI O N A L I N FO R M ATI O N
Muat Turun from Www.Somanuals.com. All Manuals Search And Muat Turun.
Maintenance
When slightly dirty
Wipe with a soft, dry cloth.
When very dirty
Wipe with a soft cloth that has been dampened with diluted, neutral
detergent. Dry with a dry cloth.
When the charging terminals become dirty
Wipe with a dry cloth or a pencil eraser, if necessary.
Caution
Do not use paint thinner, benzene, alcohol, or other
chemical products. Doing so may discolor the surface of
the telephone and damage the finish.
A D D I TI O N A L I N FO R M ATI O N [ 43 ]
Muat Turun from Www.Somanuals.com. All Manuals Search And Muat Turun.
Troubleshooting
If your phone is not performing to your expect ations, please try these simple steps first.
Symptom
Suggestion
LED won´t light • Make sure the AC adapter is plugged into the base unit and wall outlet.
status
The
when the handset is
placed in the base unit.
The audio sounds weak
and/ or scratchy.
• Make sure the handset is properly seated in the base unit.
• Make sure the charging cont acts on the handset and base unit are clean.
• Press
during a call to help eliminate background noise.
• Make sure that the base unit antenna is in a vertical position.
• Move the handset and or base unit to a different location away from met al
objects or appliances and try again.
• Make sure that you are not too far from the base.
• Check both ends of the base unit telephone line cord.
• Make sure the AC adapter is plugged into the base unit and wall outlet.
• Disconnect the AC adapter for a few minutes, t hen reconnect it.
• Reset the digit al security code (See page 40).
Can´t make or receive
calls.
talk
• Make sure
is pressed.
The handset doesn´t ring • The battery pack may be weak. Charge the battery on the base unit for
or receive a page.
more than 15 hours.
• The handset may be too far away from the base unit.
• Place the base unit away from appliances or met al objects.
• Reset the digit al security code (See page 40).
A D D I TI O N A L I N FO R M ATI O N
[ 44 ]
Muat Turun from Www.Somanuals.com. All Manuals Search And Muat Turun.
Symptom
Suggestion
Severe noise interference • Keep the handset away from microwave ovens, computers, remote control
toys, wireless microphones, alarm systems, intercoms, room monitors,
fluorescent lights, and electrical appliances.
• Move to another location or turn off the source of interference.
The Caller ID/ CIDCW does • The handset was picked up before the second ring.
not display.
• The call was placed through a switch board.
• Call your local telephone company to verify your Caller ID service
is current.
• Make sure that the CIDCW option is set to “On“ or “Opt“ .
A D D I TI O N A L I N FO R M ATI O N [ 45 ]
Muat Turun from Www.Somanuals.com. All Manuals Search And Muat Turun.
General Information
The TRU 3465 complies with FCC Parts 15 and 68.
Operating Temperature:
-10ºC to +50ºC (+14ºF to +122ºF)
AC Adapter Information
AC Adapter part number:
Input Volt age:
Output Volt age:
AD-312
120V AC 60Hz
9V DC 350 mA
Battery Information
Battery part number:
Capacity:
BT-905
600 mAH, 3.6V
Battery Use Time (per charge)
From fully charged:
Talk Mode duration
6 hours
Standby Mode duration 7 days
If the handset is left off of the base, the actual Talk Mode duration will be reduced
respective to the amount of time the handset is off the base.
Recharge your phone on a regular basis about once a week by placing the handset on the base for 15
hours. When the operating time becomes short, even after the battery is recharged, please replace the
battery. With normal usage, the battery should last about one year.
Replacement batteries may be purchased at your local Uniden dealer or by cont acting the Uniden Parts
Department (800) 554-3988. Hours are from 7:00 a.m. to 5:00 p.m. Central Time, Monday through Friday.
We can also be reached on the web at www.uniden.com
Specifications, features, and availability of optional accessories are all subject to change without
prior notice.
[ 46 ] A D D I TI O N A L I N FO R M ATI O N
Muat Turun from Www.Somanuals.com. All Manuals Search And Muat Turun.
At Uniden, we´ll take care of you!
If you need any assistance with this product, please call our Customer Hotline at
1-800-297-1023
PLEASE DO NOT RETURN THIS PRODUCT TO THE PLACE OF PURCHASE.
Our Uniden represent atives will be happy to help you with any matters regarding
the operation of this unit, available accessories, or any other related matters.
Thank you for purchasing a Uniden product.
Hours: M-F 7:00 AM to 7:00 PM CST.
A D D I TI O N A L I N FO R M ATI O N [ 47 ]
Muat Turun from Www.Somanuals.com. All Manuals Search And Muat Turun.
Memo
[ 48 ]
Muat Turun from Www.Somanuals.com. All Manuals Search And Muat Turun.
Index
0 - 9
D
P, Q
3-way conferencing . . . . . . .29
Dialing mode . . . . . . . . . . . .9
Digit al security code . . . .6, 40
Package contents . . . . . . . . .7
A
R
Adjusting the volume . . . . . .18
Area Code . . . . . . . . . . . . . 13
Auto Talk . . . . . . . . . . . . . 12
E, F, G
Receiving a call . . . . . . . . .16
Redialing a call . . . . . . . . . .19
Ringer volume . . . . . . . . . .18
Earpiece volume . . . . . . . . .18
H
B
Headset installation . . . . . .41
S
Base ringer switch . . . . . . . .18
Base speaker volume . . . . . . 18
Battery pack
Preparing and charging . . .10
Replacement and handling .42
Setting up the Base unit . . . .8
Setting up the Handset . . . .10
I, J, K, L
Installing the beltclip . . . . .41
Intercom . . . . . . . . . . . . . 30
T, U, V, W, X, Y, Z
Troubleshooting . . . . . . . . .44
Transferring a call . . . . . . . 31
M, N, O
C
Maintenance . . . . . . . . . . .43
Making a call . . . . . . . . . . .14
Memory dialing
Editing a stored name
and phone number . . . . . . 26
Erasing a stored name
and phone number . . . . . .27
Making calls
Caller ID
Caller ID service . . . . . . . .32
Calling . . . . . . . . . . . . . 36
Call Waiting . . . . . . . . . . .38
Deleting . . . . . . . . . . . . .34
Advanced Call Waiting Features . 39
Setting . . . . . . . . . . . . . 12
Storing . . . . . . . . . . . . . 37
Using . . . . . . . . . . . . . . .36
Viewing . . . . . . . . . . . . .33
Connection . . . . . . . . . . . . .9
with memory dialing . . . . .24
Storing phone
numbers and names . . . . .21
[ 49 ]
Muat Turun from Www.Somanuals.com. All Manuals Search And Muat Turun.
T H A N K Y O U F O R P U R C H A S I N G A U N I D E N C O R D L E S S P H O N E
Covered under one or more of the following U.S. patents:
4,511,761 4,523,058 4,595,795 4,797,916 5,381,460 5,426,690
5,434,905 5,491,745 5,533,010 5,574,727 5,650,790 5,660,269
5,661,780 5,663,981 5,671,248 5,717,312 5,754,407 5,768,345
5,787,356 5,838,721 5,864,619 5,893,034 5,912,968 5,915,227
5,929,598 5,930,720 5,960,358 5,987,330
© 2000 Uniden America Corporation, Fort Worth, TX
All rights reserved.
Printed in China
UCZZ01714BZ
Muat Turun from Www.Somanuals.com. All Manuals Search And Muat Turun.
|